Career History at MSAM

• Ph.D. (2018-2021)
• RA (2023-2024)
• View thesis

Research Output

---

Scholarly Collaboration Network

Publications

1. Article

   Effects of heat treatment on the temperature coefficient of resistivity of laser fabricated NiCr flexible sensors

   H. Almomani, J. Menezes, S. Abhi, P. Enrique, M. Nankali, P. Peng

   Journal of Materials Science Materials in Engineering, December 2026
2. Article

   Laser Powder Bed Fusion Processing of Ti-6Al-4V Powders with Offsize and Wide Particle Size Distributions—Process Optimization

   F. Liravi, M. Hasanabadi, T. Minasyan, P.D. Enrique, S. Soo, F. Liravi, M. Habibnejad-Korayem, E. Toyserkani

   Materials, July 2026
3. Article

   Direct laser synthesis, tuning, and patterning of metal nanoparticles-decorated graphene for flexible temperature sensors

   M. Nankali, M. Soleimani, P. Enrique, P. Peng

   Materials Today Nano, June 2025

   Cited 11 times
4. Review

   Laser powder bed fusion of difficult-to-print γ′ Ni-based superalloys: A review of processing approaches, properties, and remaining challenges

   P.D. Enrique, T. Minasyan, E. Toyserkani

   Additive Manufacturing, 25 May 2025

   Cited 82 times
5. Article

   Surface functionalization of binder jetted steels through super-solidus liquid phase sintering and electro-spark deposition

   M. Yang, J. Yan, P. Peng, P.D. Enrique, M.K. Keshavarz, M. Vlasea

   Surface and Coatings Technology, 15 July 2024

   Cited 5 times
6. Article

   Reducing moisture ingress in flexible sensors with laser patterned polyimide

   N. Mao, P.D. Enrique, P. Peng

   Manufacturing Letters, January 2024

   Cited 3 times
7. Article

   Improving the corrosion resistance of Inconel 52M laser-cladded steel

   M.S. Khan, J.C. Lourenço, M.I.S.T. Faria, P. Enrique, G. Song, Y.N. Zhou

   Journal of Manufacturing Processes, 24 November 2023

   Cited 17 times
8. Article

   Repair of additive manufactured thin-wall geometry using electrospark deposition

   J. Yan, P.D. Enrique, K. Chan, N. Scotchmer, P. Peng, N.Y. Zhou

   Journal of Remanufacturing, November 2023

   Cited 9 times
9. Article

   Pulsed laser ablation of electrically insulated features in thin NiCr films

   N. Mao, P.D. Enrique, P. Peng

   International Journal of Advanced Manufacturing Technology, October 2023

   Cited 1 time
10. Article

    Dynamic response and failure mechanisms of a laser-fabricated flexible thin film strain gauge

    N. Mao, P.D. Enrique, A.I.H. Chen, N.Y. Zhou, P. Peng

    Sensors and Actuators A Physical, 1 August 2022

    Cited 14 times
11. Article

    The influence of in-situ alloying of electro-spark deposited coatings on the multiscale morphological and mechanical properties of laser welded Al–Si coated 22MnB5

    M. Shehryar Khan, P. Enrique, A. Ghatei-Kalashami, J.G. Lopes, N. Schell, J.P. Oliveira, E. Biro, Y. Norman Zhou

    Materials Science and Engineering A, 6 April 2022

    Cited 30 times
12. Article

    Parametric Study of Automated Electrospark Deposition for Ni-Based Superalloys

    P.D. Enrique, S. Peterkin, N.Y. Zhou

    Welding Journal, July 2021

    Cited 10 times
13. Article

    Resistance is not futile: The use of projections for resistance joining of metal additively and conventionally manufactured parts

    P.D. Enrique, C. DiGiovanni, N. Mao, R. Liang, S. Peterkin, N.Y. Zhou

    Journal of Manufacturing Processes, June 2021

    Cited 7 times
14. Article

    Effect of Microsegregation on High-Temperature Microstructure Evolution in Rapid Solidification Processed Nb-Rich Ni Superalloys

    P.D. Enrique, A. Keshavarzkermani, N.Y. Zhou

    Advanced Engineering Materials, May 2021

    Cited 6 times
15. Article

    Static recrystallization impact on grain structure and mechanical properties of heat-treated Hastelloy X produced via laser powder-bed fusion

    A. Keshavarzkermani, R. Esmaeilizadeh, P.D. Enrique, H. Asgari, N.Y. Zhou, A. Bonakdar, E. Toyserkani

    Materials Characterization, March 2021

    Cited 86 times
16. Article

    Laser-assisted wire cladding using a retrofitted laser welding system

    M.S. Khan, P. Enrique, G. Song, M.I.S.T. Faria, Y. Zhou

    Surface Engineering, 2021

    Cited 14 times
17. Article

    Enhancing fatigue life of additive manufactured parts with electrospark deposition post-processing

    P.D. Enrique, A. Keshavarzkermani, R. Esmaeilizadeh, S. Peterkin, H. Jahed, E. Toyserkani, N.Y. Zhou

    Additive Manufacturing, December 2020

    Cited 48 times
18. Article

    Design of binder jet additive manufactured co-continuous ceramic-reinforced metal matrix composites

    P.D. Enrique, E. Marzbanrad, Y. Mahmoodkhani, A. Keshavarzkermani, H. Al Momani, E. Toyserkani, N.Y. Zhou

    Journal of Materials Science and Technology, 15 July 2020

    Cited 41 times
19. Article

    Electrospark deposition interlayers for dissimilar resistance welding of steel to aluminum

    P.D. Enrique, C. Li, C. DiGiovanni, S. Peterkin, N.Y. Zhou

    Manufacturing Letters, April 2020

    Cited 12 times
20. Article

    Evaluation of Electrode Degradation and Projection Weld Strength in the Joining of Steel Nuts to Galvanized Advanced High Strength Steel

    P.D. Enrique, H. Al Momani, C. DiGiovanni, Z. Jiao, K.R. Chan, N.Y. Zhou

    Journal of Manufacturing Science and Engineering, October 2019

    Cited 7 times
21. Article

    Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion

    A. Keshavarzkermani, R. Esmaeilizadeh, U. Ali, P.D. Enrique, Y. Mahmoodkhani, N.Y. Zhou, A. Bonakdar, E. Toyserkani

    Materials Science and Engineering A, 5 August 2019

    Cited 156 times
22. Article

    An investigation into the effect of process parameters on melt pool geometry, cell spacing, and grain refinement during laser powder bed fusion

    A. Keshavarzkermani, E. Marzbanrad, R. Esmaeilizadeh, Y. Mahmoodkhani, U. Ali, P.D. Enrique, N.Y. Zhou, A. Bonakdar, E. Toyserkani

    Optics and Laser Technology, August 2019

    Cited 174 times
23. Article

    Surface modification of binder-jet additive manufactured Inconel 625 via electrospark deposition

    P.D. Enrique, E. Marzbanrad, Y. Mahmoodkhani, Z. Jiao, E. Toyserkani, N.Y. Zhou

    Surface and Coatings Technology, 25 March 2019

    Cited 53 times
24. Article

    Effect of Direct Aging on Heat-Affected Zone and Tensile Properties of Electrospark-Deposited Alloy 718

    P.D. Enrique, Z. Jiao, N.Y. Zhou

    Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 1 January 2019

    Cited 14 times
25. Article

    In situ formation of metal matrix composites using binder jet additive manufacturing (3D printing)

    P.D. Enrique, Y. Mahmoodkhani, E. Marzbanrad, E. Toyserkani, N.Y. Zhou

    Materials Letters, 1 December 2018

    Cited 41 times
26. Article

    Concurrent photocatalytic degradation of organic contaminants and photocathodic protection of steel Ag–TiO2 composites

    R. Liang, O.M. Schneider, N. Lun, P.D. Enrique, D.C. Saha, L.C.M. Li Chun Fong, I. Jaciw-Zurakowsky, M.R. Servos, P. Peng, N.Y. Zhou

    Materialia, November 2018

    Cited 4 times
27. Article

    Dendritic coarsening model for rapid solidification of Ni-superalloy via electrospark deposition

    P.D. Enrique, Z. Jiao, N.Y. Zhou, E. Toyserkani

    Journal of Materials Processing Technology, August 2018

    Cited 21 times
28. Article

    Effect of microstructure on tensile properties of electrospark deposition repaired Ni-superalloy

    P.D. Enrique, Z. Jiao, N.Y. Zhou, E. Toyserkani

    Materials Science and Engineering A, 27 June 2018

    Cited 22 times
29. Article

    There's an app for that!: A mobile application for the optimization of electrolytic tinning line

    E.H. Enrique, P.D. Enrique

    IEEE Industry Applications Magazine, 1 September 2015

    Cited 1 time
30. Conference Paper

    Mobile application tool for the optimal operation of electrolytic tinning lines

    E.H. Enrique, P.D. Enrique

    Conference Record IAS Annual Meeting IEEE Industry Applications Society, 2013