Career History at MSAM

• Ph.D. (2017-2021)
• PDF (2021-2022)
• View thesis

Research Output

---

Scholarly Collaboration Network

Publications

1. Article

   Systematic investigation into laser powder bed fusion of Ti-5553 through single-track and multi-layer studies for tailored manufacturing solutions

   M. Hasanabadi, A. Keshavarzkermani, N. Azizi, H. Asgari, A. Gerlich, E. Toyserkani

   Journal of Materials Research and Technology, 1 November 2024

   Cited 6 times
2. Article

   A numerical modelling for laser Powder-bed fusion of Ti-alloy with a hybrid heat Source: An investigation on solidification and microstructure formation

   M. Hasanabadi, S. Imani Shahabad, A. Keshavarzkermani, R. Eybel, A. Gerlich, E. Toyserkani

   Optics and Laser Technology, July 2024

   Cited 25 times
3. Article

   Analysis of dynamic recrystallization through austenite grain reconstruction of additively manufactured martensitic M789 steel

   K. Nyamuchiwa, J. Pasco, T. McCarthy, A. Keshavarzkermani, T. Wang, C. Aranas

   Materials Science and Engineering A, April 2024

   Cited 10 times
4. Article

   Investigating the deformation and microstructural evolution of laser powder-bed fusion of Hastelloy X during high temperature fatigue loading

   R. Esmaeilizadeh, X. Li, M. Kuhlow, S. Holdsworth, A. Keshavarzkermani, H. Jahed, E. Toyserkani, E. Hosseini

   Additive Manufacturing Letters, April 2024

   Cited 8 times
5. Conference Paper

   Effects of Friction and Deformation Heating on Additively Manufactured M789 Steel During Hot Compression Tests

   K. Nyamuchiwa, A. Keshavarzkermani, C. Aranas

   Minerals Metals and Materials Series, 2024
6. Conference Paper

   Texture Preference and Variant Analysis of Martensite Formation in Laser Powder Bed Fusion

   J. Pasco, Y. He, A. Keshavarzkermani, C. Aranas

   Minerals Metals and Materials Series, 2024

   Cited 1 time
7. Article

   Heat treatment effects and variant selection in multi-material laser powder bed fusion of FeNi- and CoCr-based alloys

   J. Pasco, A. Keshavarzkermani, K. Nyamuchiwa, L. Jiang, T. Dorin, C. Aranas

   Virtual and Physical Prototyping, 2024

   Cited 6 times
8. Article

   Phase transformation in additively manufactured Co-Cr-Mo alloy after solution and aging heat treatment

   J. Pasco, L. Jiang, T. Dorin, A. Keshavarzkermani, Y. He, C. Aranas

   Materials Characterization, January 2024

   Cited 23 times
9. Article

   Laser-directed energy deposition of CuCrZr alloy: from statistical process parameter optimization to microstructural analysis

   A. Zardoshtian, M. Ansari, R. Esmaeilzadeh, A. Keshavarzkermani, H. Jahed, E. Toyserkani

   International Journal of Advanced Manufacturing Technology, June 2023

   Cited 19 times
10. Article

    Anisotropic tensile behavior of laser powder-bed fusion made Ti5553 parts

    N. Ramachandiran, H. Asgari, F. Dibia, R. Eybel, A. Keshavarzkermani, A. Gerlich, E. Toyserkani

    Materials Science and Engineering A, 16 February 2023

    Cited 21 times
11. Article

    Analytical modeling of multi-track powder-fed laser directed energy deposition: On the relationships among process, deposition dimensions, and solidification microstructure in additively manufactured near-β titanium alloy

    M. Ansari, A. Martinez-Marchese, M. Khamooshi, A. Keshavarzkermani, R. Esmaeilizadeh, E. Toyserkani

    Journal of Materials Processing Technology, August 2022

    Cited 24 times
12. Article

    Fatigue Characterization and Modeling of Additively Manufactured Hastelloy-X Superalloy

    R. Esmaeilizadeh, A. Keshavarzkermani, S. Faghih, B. Behravesh, U. Ali, A. Bonakdar, H. Jahed, E. Toyserkani

    Journal of Materials Engineering and Performance, August 2022

    Cited 17 times
13. Article

    On the effect of thin-wall thickness on melt pool dimensions in laser powder-bed fusion of Hastelloy X: Numerical modeling and experimental validation

    S.I. Shahabad, U. Ali, Z. Zhang, A. Keshavarzkermani, R. Esmaeilizadeh, A. Bonakdar, E. Toyserkani

    Journal of Manufacturing Processes, March 2022

    Cited 51 times
14. Article

    Columnar-to-equiaxed grain transition in powder bed fusion via mimicking casting solidification and promoting in situ recrystallization

    P. Karimi, E. Sadeghi, J. Ålgårdh, A. Keshavarzkermani, R. Esmaeilizadeh, E. Toyserkani, J. Andersson

    Additive Manufacturing, October 2021

    Cited 87 times
15. Article

    Effect of Microsegregation on High-Temperature Microstructure Evolution in Rapid Solidification Processed Nb-Rich Ni Superalloys

    P.D. Enrique, A. Keshavarzkermani, N.Y. Zhou

    Advanced Engineering Materials, May 2021

    Cited 6 times
16. Article

    Static recrystallization impact on grain structure and mechanical properties of heat-treated Hastelloy X produced via laser powder-bed fusion

    A. Keshavarzkermani, R. Esmaeilizadeh, P.D. Enrique, H. Asgari, N.Y. Zhou, A. Bonakdar, E. Toyserkani

    Materials Characterization, March 2021

    Cited 86 times
17. Article

    On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of Hastelloy X: A microstructure/defect interaction study

    R. Esmaeilizadeh, A. Keshavarzkermani, U. Ali, B. Behravesh, A. Bonakdar, H. Jahed, E. Toyserkani

    Additive Manufacturing, February 2021

    Cited 92 times
18. Conference Paper

    Influence of Pore Formation and Its Role on the Tensile Properties of 17-4 PH Stainless Steel Fabricated by Laser Powder Bed Fusion

    D. Sarker, U. Ali, F. Ahmed, R. Esmaeilizadeh, A. Keshavarzkermani, E. Marzbanrad, E. Toyserkani

    Minerals Metals and Materials Series, 2021

    Cited 6 times
19. Article

    Enhancing fatigue life of additive manufactured parts with electrospark deposition post-processing

    P.D. Enrique, A. Keshavarzkermani, R. Esmaeilizadeh, S. Peterkin, H. Jahed, E. Toyserkani, N.Y. Zhou

    Additive Manufacturing, December 2020

    Cited 48 times
20. Article

    Design of binder jet additive manufactured co-continuous ceramic-reinforced metal matrix composites

    P.D. Enrique, E. Marzbanrad, Y. Mahmoodkhani, A. Keshavarzkermani, H. Al Momani, E. Toyserkani, N.Y. Zhou

    Journal of Materials Science and Technology, 15 July 2020

    Cited 41 times
21. Article

    Microstructure and oxidation behavior of NiCr-chromium carbides coating prepared by powder-fed laser cladding on titanium aluminide substrate

    S.E. Aghili, M. Shamanian, R. Amini Najafabadi, A. Keshavarzkermani, R. Esmaeilizadeh, U. Ali, E. Marzbanrad, E. Toyserkani

    Ceramics International, 1 February 2020

    Cited 48 times
22. Article

    Heat source model calibration for thermal analysis of laser powder-bed fusion

    S.I. Shahabad, Z. Zhang, A. Keshavarzkermani, U. Ali, Y. Mahmoodkhani, R. Esmaeilizadeh, A. Bonakdar, E. Toyserkani

    International Journal of Advanced Manufacturing Technology, 1 February 2020

    Cited 54 times
23. Article

    Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed

    R. Esmaeilizadeh, A. Keshavarzkermani, U. Ali, Y. Mahmoodkhani, B. Behravesh, H. Jahed, A. Bonakdar, E. Toyserkani

    Journal of Alloys and Compounds, 5 January 2020

    Cited 106 times
24. Article

    Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion

    A. Keshavarzkermani, R. Esmaeilizadeh, U. Ali, P.D. Enrique, Y. Mahmoodkhani, N.Y. Zhou, A. Bonakdar, E. Toyserkani

    Materials Science and Engineering A, 5 August 2019

    Cited 156 times
25. Article

    An investigation into the effect of process parameters on melt pool geometry, cell spacing, and grain refinement during laser powder bed fusion

    A. Keshavarzkermani, E. Marzbanrad, R. Esmaeilizadeh, Y. Mahmoodkhani, U. Ali, P.D. Enrique, N.Y. Zhou, A. Bonakdar, E. Toyserkani

    Optics and Laser Technology, August 2019

    Cited 174 times
26. Article

    On the measurement of effective powder layer thickness in laser powder-bed fusion additive manufacturing of metals

    Y. Mahmoodkhani, U. Ali, S. Imani Shahabad, A. Rani Kasinathan, R. Esmaeilizadeh, A. Keshavarzkermani, E. Marzbanrad, E. Toyserkani

    Progress in Additive Manufacturing, 1 June 2019

    Cited 73 times
27. Article

    Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts

    U. Ali, R. Esmaeilizadeh, F. Ahmed, D. Sarker, W. Muhammad, A. Keshavarzkermani, Y. Mahmoodkhani, E. Marzbanrad, E. Toyserkani

    Materials Science and Engineering A, 22 May 2019

    Cited 140 times
28. Article

    On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing

    R. Esmaeilizadeh, U. Ali, A. Keshavarzkermani, Y. Mahmoodkhani, E. Marzbanrad, E. Toyserkani

    Journal of Manufacturing Processes, January 2019

    Cited 135 times
29. Article

    Direct metal laser melting of Inconel 718: Process impact on grain formation and orientation

    A. Keshavarzkermani, M. Sadowski, L. Ladani

    Journal of Alloys and Compounds, 5 March 2018

    Cited 88 times