Academic History at MSAM

• PDF (2016-2020)
• RA (2020-2020)

Research Output

---

Scholarly Collaboration Network

Publications

1. Article

   Development of Yttria-stabilized zirconia reinforced Inconel 625 metal matrix composite by laser powder bed fusion

   M.Z. Ghodsi, S. Khademzadeh, E. Marzbanrad, M.H. Razmpoosh, N. De Marchi, E. Toyserkani

   Materials Science and Engineering A, 19 October 2021
2. Article

   Atomic-scale Investigation of Liquid-Metal-Embrittlement Crack-path: Revealing Mechanism and Role of Grain Boundary Chemistry

   M.H. Razmpoosh, B. Langelier, E. Marzbanrad, H.S. Zurob, N. Zhou, E. Biro

   Acta Materialia, 1 February 2021

   Cited 7 times
3. Article

   Effect of mechanical alloying and preheating treatment on the phase transformation of the Al-Cu-Fe compacts annealed by microwave radiation

   V. Aghaali, T. Ebadzadeh, Z. Karimi, A. Kazemzadeh, E. Marzbanrad

   Journal of Materials Research and Technology, 2021

   Cited 2 times
4. Conference Paper

   Influence of Pore Formation and Its Role on the Tensile Properties of 17-4 PH Stainless Steel Fabricated by Laser Powder Bed Fusion

   D. Sarker, U. Ali, F. Ahmed, R. Esmaeilizadeh, A. Keshavarzkermani, E. Marzbanrad, E. Toyserkani

   Minerals, Metals and Materials Series, 2021
5. Article

   Design of binder jet additive manufactured co-continuous ceramic-reinforced metal matrix composites

   P.D. Enrique, E. Marzbanrad, Y. Mahmoodkhani, A. Keshavarzkermani, H. Al Momani, E. Toyserkani, N.Y. Zhou

   Journal of Materials Science and Technology, 15 July 2020

   Cited 8 times
6. Article

   Study of powder recycling and its effect on printed parts during laser powder-bed fusion of 17-4 PH stainless steel

   F. Ahmed, U. Ali, D. Sarker, E. Marzbanrad, K. Choi, Y. Mahmoodkhani, E. Toyserkani

   Journal of Materials Processing Technology, April 2020

   Cited 31 times
7. Article

   Microstructure and oxidation behavior of NiCr-chromium carbides coating prepared by powder-fed laser cladding on titanium aluminide substrate

   S.E. Aghili, M. Shamanian, R. Amini Najafabadi, A. Keshavarzkermani, R. Esmaeilizadeh, U. Ali, E. Marzbanrad, E. Toyserkani

   Ceramics International, 1 February 2020

   Cited 10 times
8. Article

   An investigation into the effect of process parameters on melt pool geometry, cell spacing, and grain refinement during laser powder bed fusion

   A. Keshavarzkermani, E. Marzbanrad, R. Esmaeilizadeh, Y. Mahmoodkhani, U. Ali, P.D. Enrique, N.Y. Zhou, A. Bonakdar, E. Toyserkani

   Optics and Laser Technology, August 2019

   Cited 43 times
9. Article

   On the measurement of effective powder layer thickness in laser powder-bed fusion additive manufacturing of metals

   Y. Mahmoodkhani, U. Ali, S. Imani Shahabad, A. Rani Kasinathan, R. Esmaeilizadeh, A. Keshavarzkermani, E. Marzbanrad, E. Toyserkani

   Progress in Additive Manufacturing, 1 June 2019

   Cited 20 times
10. Article

    Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts

    U. Ali, R. Esmaeilizadeh, F. Ahmed, D. Sarker, W. Muhammad, A. Keshavarzkermani, Y. Mahmoodkhani, E. Marzbanrad, E. Toyserkani

    Materials Science and Engineering A, 22 May 2019

    Cited 35 times
11. Article

    Surface modification of binder-jet additive manufactured Inconel 625 via electrospark deposition

    P.D. Enrique, E. Marzbanrad, Y. Mahmoodkhani, Z. Jiao, E. Toyserkani, N.Y. Zhou

    Surface and Coatings Technology, 25 March 2019

    Cited 16 times
12. Article

    Graphene oxide humidity sensor built entirely by additive manufacturing approaches

    F. Ahmed, A. Azhari, E. Marzbanrad, F. Liravi, U. Ali, M.A. Pope, E. Toyserkani

    Journal of Materials Science: Materials in Electronics, 2019

    Cited 2 times
13. Article

    On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing

    R. Esmaeilizadeh, U. Ali, A. Keshavarzkermani, Y. Mahmoodkhani, E. Marzbanrad, E. Toyserkani

    Journal of Manufacturing Processes, January 2019

    Cited 40 times
14. Article

    In situ formation of metal matrix composites using binder jet additive manufacturing (3D printing)

    P.D. Enrique, Y. Mahmoodkhani, E. Marzbanrad, E. Toyserkani, N.Y. Zhou

    Materials Letters, 1 December 2018

    Cited 12 times
15. Article

    On the measurement of relative powder-bed compaction density in powder-bed additive manufacturing processes

    U. Ali, Y. Mahmoodkhani, S. Imani Shahabad, R. Esmaeilizadeh, F. Liravi, E. Sheydaeian, K.Y. Huang, E. Marzbanrad, M. Vlasea, E. Toyserkani

    Materials and Design, 5 October 2018

    Cited 53 times
16. Article

    Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes

    A. Azhari, E. Marzbanrad, D. Yilman, E. Toyserkani, M.A. Pope

    Carbon, 1 August 2017

    Cited 66 times
17. Article

    Highly-stable silver nanobelts joined via diffusion-free attachment

    G. Rivers, E. Marzbanrad, M.D. Hook, P. Lee-Sullivan, Y.N. Zhou, B. Zhao

    Nanotechnology, 13 June 2016

    Cited 4 times
18. Article

    Single-step synthesis of graphene quantum dots by femtosecond laser ablation of graphene oxide dispersions

    P. Russo, R. Liang, E. Jabari, E. Marzbanrad, E. Toyserkani, Y.N. Zhou

    Nanoscale, 28 April 2016

    Cited 38 times
19. Article

    Porous silver nanosheets: A novel sensing material for nanoscale and microscale airflow sensors

    E. Marzbanrad, B. Zhao, N.Y. Zhou

    Nanotechnology, 9 October 2015

    Cited 6 times
20. Article

    Simulation of TiO2 particle trajectory in AC electric field

    R. Riahifar, B. Raissi, C. Zamani, E. Marzbanrad

    Computational Materials Science, 13 July 2015

    Cited 2 times
21. Article

    Electrospun TiO2 nanofibre-based gas sensors fabricated by AC electrophoresis deposition

    E.Z. Karimi, J. Esmaeilzadeh, E. Marzbanrad

    Bulletin of Materials Science, 1 February 2015

    Cited 6 times
22. Article

    How morphology and surface crystal texture affect thermal stability of a metallic nanoparticle: The case of silver nanobelts and pentagonal silver nanowires

    E. Marzbanrad, G. Rivers, P. Peng, B. Zhao, N.Y. Zhou

    Physical Chemistry Chemical Physics, 7 January 2015

    Cited 31 times
23. Conference Paper

    Mathematical modeling for predicting betamethasone profile and burst release from in situ forming systems based on PLGA

    S. Sarraf, E. Marzbanrad, H. Mobedi

    Canadian Conference on Electrical and Computer Engineering, 17 September 2014

    Cited 2 times
24. Article

    Effect of dispersant on chain formation capability of TiO2 nanoparticles under low frequency electric fields for NO2 gas sensing applications

    J. Esmaeilzadeh, S. Ghashghaie, P.S. Khiabani, A. Hosseinmardi, E. Marzbanrad, B. Raissi, C. Zamani

    Journal of the European Ceramic Society, May 2014

    Cited 16 times
25. Article

    Combination of asymmetric supercapacitor utilizing activated carbon and nickel oxide with cobalt polypyridyl-based dye-sensitized solar cell

    N. Bagheri, A. Aghaei, M.Y. Ghotbi, E. Marzbanrad, N. Vlachopoulos, L. Häggman, M. Wang, G. Boschloo, A. Hagfeldt, M. Skunik-Nuckowska, P.J. Kulesza

    Electrochimica Acta, 2014

    Cited 50 times
26. Article

    Electrical conductive adhesives enhanced with high-aspect-ratio silver nanobelts

    B.M. Amoli, E. Marzbanrad, A. Hu, Y.N. Zhou, B. Zhao

    Macromolecular Materials and Engineering, June 2014

    Cited 31 times
27. Article

    AC electrophoresis; Deposition of ceramic nanaoparticles on in-plane electrodes at low frequencies

    R. Riahifar, B. Raissi, E. Marzbanrad, C. Zamani

    International Journal of Engineering, Transactions B: Applications, May 2014

    Cited 2 times
28. Article

    SiC coating on graphite by sintering of Si deposited via DC-Electrophoretic Deposition (DCEPD)

    H. Salehi, E. Marzbanrad, A. Aaghaei

    Chiang Mai Journal of Science, 2013
29. Article

    Room temperature nanojoining of triangular and hexagonal silver nanodisks

    E. Marzbanrad, A. Hu, B. Zhao, Y. Zhou

    Journal of Physical Chemistry C, 15 August 2013

    Cited 42 times
30. Article

    Thermal conductivity and viscosity of TiO2–engine oil nanofluids

    M. Vasheghani, E. Marzbanrad, C. Zamani, M. Aminy, B. Raissi

    International Journal of Nanomechanics Science and Technology, 11 August 2013

    Cited 6 times
31. Article

    Fast response NO2 gas sensor based on In2O 3 nanoparticles

    P. Sowti Khiabani, E. Marzbanrad, H. Hassani, B. Raissi

    Journal of the American Ceramic Society, August 2013

    Cited 22 times
32. Article

    Enhanced photocatalytic degradation of dyes by TiO2 nanobelts with hierarchical structures

    A. Hu, R. Liang, X. Zhang, S. Kurdi, D. Luong, H. Huang, P. Peng, E. Marzbanrad, K.D. Oakes, Y. Zhou, M.R. Servos

    Journal of Photochemistry and Photobiology A: Chemistry, 15 March 2013

    Cited 67 times
33. Article

    Dispersant-assisted low frequency electrophoretically deposited TiO 2 nanoparticles in non-aqueous suspensions for gas sensing applications

    J. Esmaeilzadeh, S. Ghashghaie, B. Raissi, E. Marzbanrad, C. Zamani, R. Riahifar

    Ceramics International, September 2012

    Cited 6 times
34. Article

    Effect of low frequency electric field parameters on chain formation of ZnO nanoparticles for gas sensing applications

    S. Ghashghaie, E. Marzbanrad, B. Raissi, C. Zamani, R. Riahifar

    Journal of the American Ceramic Society, June 2012

    Cited 11 times
35. Article

    Fabrication of In 2O 3 based NO 2 gas sensor through AC-electrophoretic deposition

    P.S. Khiabani, E. Marzbanrad, C. Zamani, R. Riahifar, B. Raissi

    Sensors and Actuators, B: Chemical, 20 May 2012

    Cited 20 times
36. Article

    NO 2 gas sensor fabrication through AC electrophoretic deposition from electrospun In 2O 3 nanoribbons

    P. Sowti Khiabani, A. Hosseinmardi, E. Marzbanrad, S. Ghashghaie, C. Zamani, M. Keyanpour-Rad, B. Raissi

    Sensors and Actuators, B: Chemical, 20 February 2012

    Cited 46 times
37. Article

    Fabrication of undoped-TiO 2 nanostructure-based NO 2 high temperature gas sensor using low frequency AC electrophoretic deposition method

    J. Esmaeilzadeh, E. Marzbanrad, C. Zamani, B. Raissi

    Sensors and Actuators, B: Chemical, 3 January 2012

    Cited 22 times
38. Conference Paper

    AC Electrophoresis, A new technique for deposition of ceramic nanoparticles; Introduction, Application and mechanism

    R. Riahifar, B. Raissi, E. Marzbanrad, C. Zamani

    Key Engineering Materials, 2012

    Cited 1 time
39. Conference Paper

    Thermodynamics and molecular dynamics investigation of a possible new critical size for surface and inner cohesive energy of Al nanoparticles

    A. Chamaani, E. Marzbanrad, M.R. Rahimipour, M.S. Yaghmaee, A. Aghaei, R.D. Kamachali, Y. Behnamian

    Journal of Nanoparticle Research, November 2011

    Cited 13 times
40. Article

    Effect of Al 2O 3 phases on the enhancement of thermal conductivity and viscosity of nanofluids in engine oil

    M. Vasheghani, E. Marzbanrad, C. Zamani, M. Aminy, B. Raissi, T. Ebadzadeh, H. Barzegar-Bafrooei

    Heat and Mass Transfer/Waerme- und Stoffuebertragung, November 2011

    Cited 48 times
41. Article

    Low-frequency electrophoretic deposition of ZnO nanoparticles: Effect of organic medium on deposition pattern

    S. Ghashghaie, E. Marzbanrad, B. Raissi Dehkordi

    Journal of the American Ceramic Society, October 2011

    Cited 10 times
42. Article

    Effect of hydrothermal duration on synthesis of WO 3 nanorods

    H. Hassani, E. Marzbanrad, C. Zamani, B. Raissi

    Journal of Materials Science: Materials in Electronics, September 2011

    Cited 18 times
43. Article

    A new technique for micro-patterning of nanoparticles on non-conductive substrate by low frequency AC electrophoresis

    R. Riahifar, E. Marzbanrad, B. Raissi, C. Zamani

    Journal of Materials Science: Materials in Electronics, September 2011

    Cited 6 times
44. Article

    An investigation on the behavior of electrospun ZnO nanofibers under the application of low frequency AC electric fields

    S. Ghashghaie, A.M. Bazargan, M.E. Ganji, E. Marzbanrad, C. Zamani, B. Raissi, M. Keyanpour-Rad, M.A. Bahrevar

    Journal of Materials Science: Materials in Electronics, September 2011

    Cited 13 times
45. Article

    Sorting ZnO particles of different shapes with low frequency AC electric fields

    R. Riahifar, E. Marzbanrad, B. Raissi, C. Zamani, M. Kazemzad, A. Aghaei

    Materials Letters, 28 February 2011

    Cited 18 times
46. Article

    Effect of parameters on deposition pattern of ceramic nanoparticles in non-uniform AC electric field

    R. Riahifar, B. Raissi, E. Marzbanrad, C. Zamani

    Journal of Materials Science: Materials in Electronics, January 2011

    Cited 21 times
47. Conference Paper

    Bilateral prediction of formulation parameters and drug release profiles in porous monolithic devices: Application of artificial neural networks

    P. Nemati, M. Imani, E. Marzban-Rad, A.M. Nasrabadi

    2010 17th Iranian Conference of Biomedical Engineering, ICBME 2010 - Proceedings, 2010
48. Article

    Corrosion behavior of Zr41.2Ti13.8Ni10Cu12.5Be22.5 bulk metallic glass in various aqueous solutions

    M.H. Pourgashti, E. Marzbanrad, E. Ahmadi

    Materials and Design, May 2010

    Cited 12 times
49. Article

    WO3-based NO2 sensors fabricated through low frequency AC electrophoretic deposition

    E.K. Heidari, C. Zamani, E. Marzbanrad, B. Raissi, S. Nazarpour

    Sensors and Actuators, B: Chemical, 8 April 2010

    Cited 64 times
50. Article

    Role of substrate potential on filling the gap between two planar parallel electrodes in electrophoretic deposition

    R. Riahifar, E. Marzbanrad, B.R. Dehkordi, C. Zamani

    Materials Letters, 15 March 2010

    Cited 20 times
51. Article

    Nanocasting synthesis of ultrafine WO 3 nanoparticles for gas sensing applications

    E.K. Heidari, E. Marzbanrad, C. Zamani, B. Raissi

    Nanoscale Research Letters, February 2010

    Cited 38 times
52. Article

    Particle size separation by alternating electrophoretic deposition

    B. Raissi, E. Marzbanrad, A.R. Gardeshzadeh

    Journal of the European Ceramic Society, 1 December 2009

    Cited 19 times
53. Conference Paper

    Dielectrophoretic assembly of ZnO nanorods for gas sensing

    S.R. Mahmoodi, B. Raissi, E. Marzbanrad, N. Shojayi, A. Aghaei, C. Zamani

    Procedia Chemistry, September 2009

    Cited 20 times
54. Conference Paper

    Aging behavior of yttria stabilized zirconia (YSZ) in non aqueous suspensions for electrophoretic deposition application

    I.A. Borojeni, B. Raissi, A. Maghsoudipour, M. Kazemzad, E. Marzbanrad

    Key Engineering Materials, 2009

    Cited 6 times
55. Conference Paper

    Deposition of multiwall carbon nanotubes using low frequency alternating electrophoretic deposition

    A.R. Gardeshzadeh, B. Raissi, E. Marzbanrad

    Key Engineering Materials, 2009

    Cited 4 times
56. Article

    Fabrication of resistive CO gas sensor based on SnO 2 nanopowders via low frequency AC electrophoretic deposition

    A.R. Gardeshzadeh, B. Raissi, E. Marzbanrad, H. Mohebbi

    Journal of Materials Science: Materials in Electronics, 2009

    Cited 27 times
57. Article

    Microwave hybrid synthesis of silicon carbide nanopowders

    T. Ebadzadeh, E. Marzban-Rad

    Materials Characterization, January 2009

    Cited 32 times
58. Article

    Molecular dynamics investigation of mechanical mixing in mechanical alloying

    G. Ali Nematollahi, E. Marzbanrad, A.R. Aghaei

    Materials Science and Engineering A, 25 September 2008

    Cited 12 times
59. Article

    Electrophoretic deposition of SnO2 nanoparticles using low frequency AC electric fields

    A.R. Gardeshzadeh, B. Raissi, E. Marzbanrad

    Materials Letters, 15 April 2008

    Cited 31 times
60. Conference Paper

    Preparation of Si powder thick films by low frequency alternating electrophoretic deposition

    A.R. Gardeshzadeh, B. Raissi, E. Marzbanrad

    Journal of Materials Science, April 2008

    Cited 18 times
61. Article

    Effect of temperature and strain rate on the superplastic behaviour of high-carbon steel

    M.M. Moshksar, E. Marzban Rad

    Journal of Materials Processing Technology, 1 November 1998

    Cited 16 times